S uper W orkstation 5046A-X User's Manual 1-2 Serverboard Features At the heart of the SuperWorkstation 5046A-X lies the C7X58, a single processor serverboard based on the Intel X58 + ICH10R chipset. Below are the main features of the C7X58. (See Figure 1-1 for a block diagram of the chipset). Processors The C7X58 supports a single Intel Core TM i7, i7 Extreme Edition or future Intel Nehalem processor families (next generation Intel Xeon® processor). Please refer to the serverboard description pages on our web site for a complete listing of sup- ported processors (www.supermicro.com).
Memory The C7X58 has six DIMM slots that can support up to 24 GB of unbuffered ECC or non-ECC DDR3-1600/1333/1066/800 SDRAM. Single channel and dual-channel interleaved confi gurations are supported. Modules of the same size and speed should be used. See Chapter 5 for details. Serial ATA A SATA controller is integrated into the South Bridge (ICH10R) section of the chipset to provide a six-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 capable. The Serial ATA drives are hot-swappable units. Note: The operating system you use must have RAID support to enable the hot- swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots The C7X58 has two PCI-E 2.0 x16, one PCI-E x4 (in a x8 slot) and one 32-bit PCI slots. Onboard Controllers/Ports One fl oppy drive controller and two onboard ATA/100 controllers are provided to support up to two IDE hard drives or ATAPI devices (one IDE connection is reserved for a Compact Flash card). The color-coded I/O ports include two COM ports, six USB 2.0 ports, PS/2 mouse and keyboard ports, one Gb Ethernet port and six HDA (High Defi nition Audio) ports. Two IEEE 1394a "Firewire" headers are also included onboard. 1-2