— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 1: Introduction Other Features Other onboard features that promote system health include onboard voltage moni- tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue. 1-3 Chassis Features The SuperWorkstation 5046A-X is a scaleable system designed with today's most state-of-the-art features. The following is a general outline of the main features of the SC743TS-865BP-SQ chassis. System Power The 5046A-X features a single 865W power supply. This power supply unit has been designed to operate at a low noise level to make it ideal for use in a worksta- tion environment.

SAS Subsystem The SC743TS-865BP-SQ chassis was designed to support eight SAS hard drives, which are hot-swappable units (7045A-C3 only). SATA Subsystem The SC743TS-865BP-SQ supports up to six 3 Gb/s Serial ATA drives. The SATA drives are hot-swappable units and are connected to a backplane that provides power and control. Front Control Panel The control panel on the SuperWorkstation 5046A-X provides you with system monitoring and control. LEDs indicate system power, HDD activity, network activity, overheat conditions and power supply failure. A main power button and a system reset button are also included. Note: the power supply fail LED indicates the power supply fan has failed.

I/O Backplane The SC743TS-865BP-SQ is an ATX form factor chassis that can be used as a tower or mounted in a 4U rackmount confi guration. The I/O backplane provides seven expansion slots, two COM ports, a parallel port, four USB 2.0 ports, PS/2 mouse and keyboard ports, two Gigabit Ethernet port(s) and 7.1 HDA ports. 1-3