— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 5: Advanced Serverboard Setup Memory Support The C7X58 supports up to 24 GB of unbuffered ECC/non-ECC DDR3-1600- /1333/1066/800 SDRAM. Notes: Due to the OS limitations, some operating systems may not show more than 4 GB of memory. Due to allocating memory to system devices, memory remaining available for operational use will be reduced when 4 GB of SDRAM is used. The reduc- tion in memory availability is disproportional. (Refer to the following Memory Availability Table for details.) Order of Populating DIMM Slots For memory to work properly, follow the table below for the correct order of populat- ing the DIMM slots. See the motherboad layout page for slot numbering. Note:

an "X" indicates the slot should be populated. Population Rules Any combination of x8 and x16 UDIMMs, with 1Gb or 2Gb DRAM density. Populate DIMMs using the "A" DIMM slots fi rst. Any of the slots may be used. Populate the "B" slots only after all "A" slots have been fi lled. 5-9 DIMM Installation Chart Number of DIMMs 1A 2A 3A 1B 2B 3B 1 X 2 X X 3 X X X 4 X X X X 5 X X X X X 6 X X X X X X