— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 5: Advanced Serverboard Setup 5-9 Connector Defi nitions Main ATX Power Supply Connector The primary power supply connector (JPW1) meets the SSI (Superset ATX) 24-pin specifi cation. Refer to the table on the right for the pin defi nitions of the ATX 24-pin power connector. You must also connect the 8-pin (JPW2) power connector to your power supply (see below). Processor Power Connector JPW2 must also be connected to the power supply to provide power for the processor. See the table on the right for pin defi nitions. Required Connection Secondary Power Connector It is recommended that JPW3 be con- nected to the power supply to provide secondary power.

See the table at right for pin defi nitions. Recommended Connection Power Button The connection for the power button is on pins 1 and 2 of JF1. The chas- sis power button should be connected here. See the table on the right for pin defi nitions. Reset Connector The reset header is located on pins 3 and 4 of JF1. Attach the reset switch on the computer chassis to these pins. See the table on the right for pin defi nitions.

5-13 ATX Power 24-pin Connector Pin Defi nitions (JPW1) Pin# Defi nition Pin # Defi nition 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 COM 3 COM 16 PS ON _ 4 +5V 17 COM 5 COM 18 COM 6 +5V 19 COM 7 COM 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 COM 12 +3.3V 8-pin (+12V) Processor Power Pin Defi nitions (JPW2) Pins Defi nition 1 - 4 Ground 5 - 8 +12V 4-pin Secondary Power Pin Defi nitions (JPW3) Pins Defi nition 1 and 2 Ground 3 and 4 +12V Power Button Pin Defi nitions (JF1) Pin# Defi nition 1 PW ON _ 2 Ground Reset Button Pin Defi nitions (JF1) Pin# Defi nition 3 Reset 4 Ground