S uper W orkstation 5046A-X User's Manual Wake-On-Ring The Wake-On-Ring header is des- ignated JWOR. This function allows your computer to receive and be "awakened" by an incoming call when in the suspend state. See the table on the right for pin defi nitions. You must also have a WOR card and cable to use this feature. Speaker On the JD1 header, pins 3~4 are used for the internal speaker. Close pins 3~4 with a cap to use the onboard speaker. If you wish to use an external speaker, connect the speaker cable to pins 1~4. See the table on the right for pin defi nitions. Serial Ports Two serial ports are included on the C7X58. See the table on the right for pin defi nitions.
SGPIO Header Two SGPIO (Serial General Purpose Input/Output) headers are designated SGPIO0 and SGPIO1. These head- ers are used to communicate with the system's enclosure management chip. See the table on the right for pin defi nitions.
NC = No Connection 5-16 Wake-On-Ring Pin Defi nitions (JWOR) Pin# Defi nition 1 Ground (Black) 2 Wake-up Speaker Connector Pin Defi nitions (JD1) Pin Setting Defi nition Pins 3~4 Internal Speaker Pins1~4 External Speaker Serial Port Pin Defi nitions (COM1/COM2) Pin # Defi nition Pin # Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC SGPIO Header Pin Defi nitions (T-SGPIO0/T-SGPIO1) Pin# Defi nition Pin Defi nition 1 NC 2 NC 3 Ground 4 DATA Out 5 Load 6 Ground 7 Clock 8 NC