— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

S uper W orkstation 5046A-X User's Manual Lockstep - The motherboard uses two areas of memory to run the same set of operations in parallel. Sparing - A preset threshold of correctable errors is used to trigger fail-over. The spare memory is put online and used as active memory in place of the failed memory. Demand Scrubbing A memory error-correction scheme where the Processor writes corrected data back into the memory block from where it was read by the Processor. The options are Disabled and Enabled. Patrol Scrubbing A memory error-correction scheme that works in the background looking for and correcting resident errors. The options are Disabled and Enabled.

Throttling - Closed Loop Throttling improves reliability and reduces power in the processor by automatic voltage control during processor idle states. Available options are Disabled and Enabled. If Enabled, the following items will appear: Hyster Temp Temperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM temperature threshold is reached before Closed Loop Throttling begins. The options are Disabled , 1.5 o C, 3.0 o C, and 6.0 o C. Guardband Temp This is the temperature which applies to the DIMM temperature threshold. Each step is in 0.5 o C unit. The default is [006] . Press "+" or "-" on your keyboard to change this value.

Inlet Temp This is the temperature detected at the chassis inlet. Each step is in 0.5 o C unit. The default is [070] . Press "+" or "-" on your keyboard to change this value. Temp Rise This is the temperature rise to the DIMM thermal zone. Each step is in 0.5 o C unit. The default is [020] . Press "+" or "-" on your keyboard to change this value. 7-10