Chapter 7: BIOS DCA Prefetch Delay A DCA Prefetch is used with TOE components to prefetch data in order to shorten execution cycles and maximize data processing effi ciency. Prefetching too fre- quently can saturate the cache directory and delay necessary cache accesses. This feature reduces or increases the frequency the system prefetches data. The options are [8], [16], [32] , [40], [48], [56], [64], [72], [80], [88], [96], [104], [112], [120] X Advanced Chipset Control The items included in the Advanced Settings submenu are listed below: QPI and IMC Confi guration QPI (QuickPath Interconnect) is the connection between the CPU and the motherboard's I/O hub.
This section enables this feature to be modifi ed according to the desired confi guration, such as speed and power consumption. QPI Links Speed This feature selects QPI's data transfer speed.. The options are Slow-mode, and Full Speed QPI Frequency This selects the desired QPI frequency. The options are Auto , 4.800 GT, 6.400 GT. QPI L0s and L1 This enables the QPI power state to low power. L0s and L1 are automatically selected by the motherboard. The options are Disabled and Enabled. Memory Frequency This feature forces a DDR3 frequency slower than what the system has detected. The available options are Auto , Force DDR-800, Force DDR-1066, Force DDR-1333, Force DDR-1600.
Memory Mode The options are Independent , Channel Mirror, Lockstep and Sparing. Independent - All DIMMs are available to the operating system. Channel Mirror - The motherboard maintains two identical copies of all data in memory for redundancy. 7-9