— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

S uper W orkstation 5046A-X User's Manual PCI Latency Timer This feature sets the latency Timer of each PCI device installed on a PCI bus. Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64 , 96, 128, 160, 192, 224 and 248. PCIX Slot Frequency Use this setting to change the clock frequency of the PCIX slot(s). The available options are Auto , 33MHz PCI, 66MHz PCI, 66MHz PCI-X M1, 100MHz PCI-X M1, and 133MHz PCI-X M1. PXH IOAPIC Function Disable this setting for Windows Vista and Windows 2008. This is provided to optimize compatibility. The options are Disabled and Enabled.

PCI IDE Bus Master When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives. The options are Disabled and Enabled . PCI Slot 1 ~ PCI Slot 6 Use this setting to disable any of the PCI slots. The options are Disabled and Enabled . Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM This feature is to enable LAN OPROM for PXE. This is to boot computers using a network interface. The options are Disabled and Enabled. X Super IO Device Confi guration Serial Port1 Address/ Serial Port2 Address This option specifi es the base I/O port address and the Interrupt Request address accessing any system resources.

When this option is set to Disabled, the serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for Serial of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from Port1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4, and 2E8/IRQ3. Serial Port 2 Mode Use this feature to confi gure Serial Port 2 mode. The options are Normal, IrDA and ASK IR. IrDA (Infra-Red Data) is an industry standard for remote control 7-16