Supermicro H8QG6+-F / H8QGi+-F — Supermicro H8QG6+-F / H8QGi+-F Serverboard User Manual PDF

Chapter 2: Installation VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings. USB Wake-Up JPUSB1 jumper allows you to "wake up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system. These jumpers are used in conjunction with the USB Wake-Up function in the BIOS. See the table on the right for jumper settings and jumper connections.

(the default is Enabled) BMC Jumper JPB1 is used to enable or disable theBMC (Baseboard Management Control) Chip and the onboard IPMI connection.This jumper is used together with the IPMI settings in the BIOS. The default position is on pins 1 and 2 to Enable BMC. See the table on the right for jumper settings. 2-23 VGA Enable/Disable Jumper Settings (JPG1) Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled Backpanel USB Wake-Up Enable (JPUSB1) Jumper Settings Jumper Setting Defi nition Pins 1-2 Enabled (default) Pins 2-3 Disabled BMC Jumper Enable (JPB1) Jumper Settings Jumper Setting Defi nition Pins 1-2 Enabled (default) Pins 2-3 Disabled