Supermicro H8QG6+-F / H8QGi+-F — Supermicro H8QG6+-F / H8QGi+-F Serverboard User Manual PDF

Chapter 4: BIOS ECC Confi guration ECC Mode This submenu sets the level of ECC protection. Options include Disabled, Basic , Good, Super, Max and User. Selecting User activates the other option for user setting. Note: The "Super" ECC mode dynamically sets the DRAM scrub rate so all of memory is scrubbed in 8-hours. DRAM ECC Enable This setting allows hardware to report and correct memory errors automatically, maintaining system integrity. Options are Enabled or Disabled. DRAM Timing Confi guration DRAM Timing Confi g This setting specifi es the DRAM timing confi guration. Options are Auto and Manual. Memory Timing Parameters This selects the which node's timing parameters to display.

The only selection for this option is CPU Node 0 . Clock Speed Information Clock speed information for memory is also displayed under this Northbridge Chipset Confi rguration page. IOMMU This setting is used to disable or set the GART size in systems without AGP. Options include Enabled and Disabled . OHCI/EHCI HC Device Functions These settings allow you to either Enable or Disable functions for OHCI or EHCI bus devices. USB 2.0 Controller Mode Use this setting to confi gure the USB 2.0 Controller in either Hi-Speed (480 Mps) or Full Speed (12 Mps) mode. 4-5