H8DGT-HF/HIBQF Serverboard User's Manual 2-8 Connector Defi nitions Universal Serial Bus Ports Two Universal Serial Bus ports (USB 2.0) are located beside the LAN1 port (USB0/1). One additional Type A port (USB4) is included on the motherboard. See the table on the right for pin defi nitions. USB Headers Two USB 2.0 headers (USB2/3) are also included on the motherboard. These may be connected to provide front side access. A USB cable (not included) is needed for the connection. See the table on the right for pin defi nitions. Note: NC indicates no connection. Serial Ports The COM1 serial port is located beside the VGA port. Refer to the motherboard layout for the location of the COM2 header.
See the table on the right for pin defi nitions. Note: NC indicates no connection. Chassis Intrusion A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion.
2-12 Universal Serial Bus Ports Pin Defi nitions (USB 0/1, USB4) USB0/1 Pin# Defi nition USB4 Pin# Defi nition 1 +5V 1 +5V 2 PO- 2 PO- 3 PO+ 3 PO+ 4 Ground 4 Ground Universal Serial Bus Headers Pin Defi nitions (USB2/3) JUSB3 Pin# Defi nition Pin# Defi nition 1 +5V 2 +5V 3 PO- 4 PO- 5 PO+ 6 PO+ 7 Ground 8 Ground 9 Key 10 NC Serial Port Pin Defi nitions (COM1/COM2) Pin# Defi nition Pin# Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC Chassis Intrusion Pin Defi nitions (JL1) Pin# Defi nition 1 Battery voltage 2 Intrusion signal