Super Micro Computer, Inc. MNL-H8DGT-HF-HIBQF - SR56x0 — Super Micro H8DGT-HF/HIBQF Motherboard User Manual PDF

H8DGT-HF/HIBQF Serverboard User's Manual JI 2 C1/JI 2 C2 allows you to enable the I 2 C bus to communicate with the PCI- Express slot. For the jumpers to work properly, please set both jumpers to the same setting. If enabled, both jumpers must be enabled. If disabled, both jumpers must be disabled. See the table on the right for jumper settings. I2C to PCI-Express Slot Watch Dog Enable/Disable JWD enables the Watch Dog function, a system monitor that takes action when a software application freezes the system. Jumping pins 1-2 will have WD reboot the system if a program freezes. Jumping pins 2-3 will generate a non-maskable interrupt for the program that has frozen.

See the table on the right for jumper settings. Watch Dog must also be enabled in BIOS. Note: when Watch Dog is enabled, the user must write their own application software to disable the Watch Dog Timer. VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings. BMC Jumper JPB is used to enable or disable theBMC (Baseboard Management Control) Chip and the onboard IPMI connection.This jumper is used together with the IPMI settings in the BIOS. The default position is on pins 1 and 2 to Enable BMC. See the table on the right for jumper settings.

2-16 I2C to PCI-Express Slot Jumper Settings (JI2C1/JI2C2) Jumper Setting Defi nition Closed Enabled Open Disabled Watch Dog Jumper Settings (JWD) Jumper Setting Defi nition Pins 1-2 Reset Pins 2-3 NMI Open Disabled VGA Enable/Disable Jumper Settings (JPG1) Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled BMC Jumper Enable (JPB) Jumper Settings Jumper Setting Defi nition Pins 1-2 Enabled (default) Pins 2-3 Disabled