Super Micro Computer, Inc. MNL-H8DGT-HF-HIBQF - SR56x0 — Super Micro H8DGT-HF/HIBQF Motherboard User Manual PDF

Chapter 2: Installation LAN1/2 Enable/Disable Change the setting of jumper JPL1 to enable or disable the LAN1 and LAN2 Ethernet ports. See the table on the right for jumper settings. The default setting is enabled. 2-10 Onboard Indicators GLAN LEDs GLAN LED There are two LAN ports (LAN1/2) on the motherboard. Each Ethernet LAN port has two LEDs. The Yellow LED on the right indicates connection and activity. The Link LED on the left side may be green, amber or off to indicate the speed of the connection. See the tables at right for more information.

Activity LED Link Speed LED IPMI Dedicated LAN LEDs IPMI LAN In addition to LAN Ports 1/2, an IPMI Dedicated LAN is also located on the I/O Backplane. The amber LED on the right indicates connection and activity; while the green LED on the left indicates the speed of the connection. See the tables at right for more information.

Activity LED Link LED 2-17 LAN1/2 En/Disable Jumper Settings (JPL1) Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled GLAN Activity Indicator (Right) LED Settings Color Status Defi nition Off No Connections Yellow Flashing Active LAN Connection Speed Indicator (Left) LED Settings LED Color Defi nition Off 10 MHz Green 100 MHz Amber 1 GHz IPMI LAN Link/Speed LED (Left) & Activity LED (Right) Color Status Defi nition Off Off No Connection Green: Solid Link/ Speed (Left) 100 Mb/s Amber Blinking Activity (Right) Active