H8DGT-HF/HIBQF Serverboard User's Manual Two InfiniBand LED indicators (LE2/LE3) are located near the Infi niBand port of the H8DGT-HIBQF Serverboard. The green LED (LE2) is the Infi niBand link LED while the yellow LED (LE3) indicates activity. Refer to the tables at the right for details. Infi niBand LED Indicators IPMI LED The serverboard contains an IPMI LED (DP1) located near the corner above the PCI-E slots. When this LED is lit, it means a connection is active for the built-in IPMI on the serverboard. Note: This LED is not installed on non- IPMI boards. Power LED DP2 is an Onboard Power LED. When this LED is lit, it means power is present on the serverboard.
Be sure to turn off the system and unplug the power cord(s) before removing or installing components. UID LED (LE1) A rear UID LED Indicator, located at LE1, works in conjunction with the rear UID switch to provide easy identifi cation for a unit that might be in need of service. Refer to Page 2-13 for further UID details.
2-18 Infi niBand LED (LE2) Activity LED Color Status Defi nition Green Solid Infi niBand Connected Off Off No Connection Infi niBand LED (LE3) Activity LED Color Status Defi nition Yellow Solid Infi niBand Active Yellow Dim Infi niBand Connected, Activity Idle Off Off No Connection IPMI LED (DP1) State System Status On Active connection Off No connection Power LED (DP2) State System Status On Standby power present on motherboard Off No power connected