3-7 Parameter List 3-7 Parameter List Monitor Mode (d ) •The default setting displays "d001" at power-on. To select the optional display, change the setting in "b038". 3 Operation 3-19 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page d001 Output frequency monitor 0.0 to 400.0 Yes Hz 4-1 d002 Output current monitor 0.0 to 999.9 1000 to 9999 A 4-1 d003 Rotation direction monitor F: Forward o: Stop r: Reverse 4-1 d004 PID feedback value monitor 0.00 to 99.99 100.0 to 999.9 1000. to 9999.
1000 to 9999 (10000 to 99990) 100 to 999 (100000 to 999000) (Enabled when the PID function is selected) 4-1 d005 Multi-function input monitor FW (Example) Terminals FW, S7, S2, S1 : ON Terminals S8, S6, S5, S4, S3: OFF S8 S7 S6 S5 S4 S3 S2 S1 4-2 d006 Multi-function output monitor (Example) Terminals P2, P1 : ON Terminals MA, P5, P4, P3: OFF MA P5 P4 P3 P2 P1 4-2 d007 Output frequency monitor (after conversion) 0.00 to 99.99 100.0 to 999.9 1000. to 9999. 1000 to 3996 (10000 to 39960) (Output frequency × Conversion factor of b086) Yes 4-2 d008 Real frequency monitor -400. to -100. -99.9 to 0.00 to 99.99 100.0 to 400.0 Hz 4-3 d009 Torque reference monitor -200.
to +200. % 4-3 d010 Torque bias monitor -200. to +200. % 4-3 d012 Output torque monitor -200. to +200. % 4-3 d013 Output voltage monitor 0. to 600. V 4-4 d014 Input power monitor 0.0 to 999.9 kW 4-4