3-7 Parameter List 3 Operation * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. 3-28 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page RUN mode, Acceleration/Deceleration functions A085 RUN mode selection 00: Normal operation 01: Energy-saving operation 02: Automatic operation 00 No 4-36 A086 Energy-saving response/accuracy adjustment 0.0 to 100.0 50.0 Yes A092 Acceleration time 2 0.01 to 99.99 100.0 to 999.9 1000. to 3600.
15.00 Yes s 4-37 A292 * 2nd acceleration time 2 15.00 A392 * 3rd acceleration time 2 15.00 A093 Deceleration time 2 15.00 A293 * 2nd deceleration time 2 15.00 A393 * 3rd deceleration time 2 15.00 A094 2-step acceleration/ deceleration selection 00: Switched via multi-function input 09 (2CH) 01: Switched by setting 02: Enabled only when switching forward/ reverse 00 No A294 * 2nd 2-step acceleration/ deceleration selection 00 A095 2-step acceleration frequency 0.00 to 99.99 100.0 to 400.0 0.00 No Hz A295 * 2nd 2-step acceleration frequency 0.00 A096 2-step deceleration frequency 0.00 No Hz A296 * 2nd 2-step deceleration frequency 0.00 A097 Acceleration pattern selection 00: Line 01:
S-shape curve 02: U-shape curve 03: Inverted U-shape curve 04: EL-S-shape curve 00 No 4-38 A098 Deceleration pattern selection 00 No