3-7 Parameter List 3 Operation * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. 3-46 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page Meter adjustment C105 MP gain setting 50. to 200. 100. Yes % 4-105 C106 AM gain setting 50. to 200. 100. Yes % 4-106 C107 AMI gain setting 50. to 200. 100. Yes % C109 AM bias setting 0. to 100. 0. Yes % C110 AMI bias setting 0. to 100. 20. Yes % Terminal C111 Overload warning level 2 0.0 to 2.00 × Rated current Rated current No A 4-49 Adjustment C121 FV zero adjustment 0. to 9999.
1000 to 6553 (10000 to 65530) Factory default Yes C122 FI zero adjustment 0. to 9999. 1000 to 6553 (10000 to 65530) Factory default Yes C123 FE zero adjustment 0. to 9999.
1000 to 6553 (10000 to 65530) Factory default Yes Output terminal operation function C130 Output P1 ON delay 0.0 to 100.0 0.0 No s 4-103 C131 Output P1 OFF delay 0.0 to 100.0 0.0 C132 Output P2 ON delay 0.0 to 100.0 0.0 C133 Output P2 OFF delay 0.0 to 100.0 0.0 C134 Output P3 ON delay 0.0 to 100.0 0.0 C135 Output P3 OFF delay 0.0 to 100.0 0.0 C136 Output P4 ON delay 0.0 to 100.0 0.0 C137 Output P4 OFF delay 0.0 to 100.0 0.0 C138 Output P5 ON delay 0.0 to 100.0 0.0 C139 Output P5 OFF delay 0.0 to 100.0 0.0 C140 Relay output ON delay 0.0 to 100.0 0.0 C141 Relay output OFF delay 0.0 to 100.0 0.0 C142 Logic output signal 1 selection 1 Same as options for C021 to C026 (excluding LOG1 to LOG6) 00 C143 Logic output signal 1 selection 2 Same as options for C021 to C026 (excluding LOG1 to LOG6) 00