omron — Drive Status Monitors: U1-01 to U6-19

4.6 Basic Drive Setup Adjustments • In the case of a general purpose (standard) motor, the cooling capability is reduced at a low speed. Motor overload protection (OL1) may occur in frequencies lower than motor rated speed. Use an exclusive-use or inverter-duty motor to operate the drive at rated current at low frequency. ◆ Drive Status Monitors: U1-01 to U6-19 Parameter group U displays various data regarding the operating status of the drive. The following example demonstrates viewing output voltage reference (U1-06). Refer to Parameter List on page 293 for more details about Drive Status Monitors.

Table 4.21 Drive Status Monitors 146 OYMC TOEP C71060622-01-OY V1000 User Manual Step Display/Result 1. Turn on the power to the drive. The initial display appears. ⇒ 2. Press until “Monitor Display” appears. ⇒ 3. Press to enter the Parameter Setting Screen. ⇒ 4. Press until U1-06 appears. ⇒ Press to display the voltage reference. The Output Voltage 5. Reference appears. ⇒ No. Parameter Name Page U1-01 Frequency Reference 360 U1-02 Output Frequency 360 U1-03 Output Current 360 U1-04 Control Mode 360 U1-05 Motor Speed 361 U1-06 Output Voltage Reference 361 No.

Parameter N ame Page U3-10 10th Most Recent Fault 365 U3-11 Cumulative Operation T Recent Fault ime at Most 365 U3-12 Cumulative Operation T Most Recent Fault ime at 2nd 365 U3-13 Cumulative Operation T Most Recent Fault ime at 3rd 365 U3-14 Cumulative Operation T Most Recent Fault ime at 4th 365 U3-15 Cumulative Operation T Most Recent Fault ime at 5th 365