omron — 7.1 Section Safety

7.1 Section Safety 7.1 Section Safety DANGER Do not connect or disconnect wiring while the power is on. Electrical Shock Hazard Failure to comply will result in death or serious injury. Disconnect all power to the drive, wait at least five minutes after all indicators are off, measure the DC bus voltage to confirm safe level, and check for unsafe voltages before servicing to prevent electric shock. The internal capacitor remains charged even after the power supply is turned off. The charge indicator LED will extinguish when the DC bus voltage is below 50 Vdc. WARNING Electrical Shock Hazard Do not operate equipment with covers removed.

Failure to comply could result in death or serious injury. The diagrams in this section may show drives without covers or safety shields to show details. Be sure to reinstall covers or shields before operating the drives and run the drives according to the instructions described in this manual. Do not remove covers or touch circuit boards while the power is on. Failure to comply could result in death or serious injury. 260 OYMC TOEP C71060622-01-OY V1000 User Manual