omron — A.4 Drive Specifications

A.4 Drive Specifications Speed control accuracy varies somewhat according to the type of motor and drive settings. Instantaneous average deceleration torque refers to the torque required to decelerate the motor (uncoupled from the load) from 60 Hz in the shortest time. Ensure that Stall Prevention Selection during Deceleration is disabled (L3-04 = 0) or set to 3 when using a braking resistor or the Braking Resistor Unit. The default setting for the stall prevention function will interfere with the braking resistor. Overload protection may be triggered when operating with 150% of the rated output current if the output frequency is less than 6 Hz. Parameter settings allow up to 150 V.

A Momentary Power Loss Ridethru Unit is required for 200/400 V class drives 7.5 kW and less if the application needs to continue running during a momentary power loss up to 2 seconds. Ground protection cannot be provided under the following circumstances when a ground fault is likely in the motor windings during run: Low ground resistance for the motor cable and terminal block; low ground resistance for the motor cable and terminal block; or the drive is powered up from a ground short. Specifications A OYMC TOEP C71060622-01-OY V1000 User Manual 287 Item Specification Environment Surrounding Area Install the drive in an area free from:

• oil mist and dust • metal shavings, oil, water or other foreign materials • radioactive materials • combustible materials • harmful gases and liquids • excessive vibration • chlorides • direct sunlight Orientation Install the drive vertically to maintain maximum cooling effects Safety Regulations and Standards Safe Disable Input according to UL508C, EN954-1 Safety Category 3; EN61508, SIL2; Time from input open to drive output stop is less than 1 ms. Protective Enclosure Open chassis (IP20) Wall-mounted enclosure (NEMA Type 1): available as an option Cooling Method VZAB0P1 to B0P7: self-cooled VZAB1P5 to B4P0: cooling fan VZA20P1 to 20P4: self-cooled VZA20P7 to 2015:

cooling fan VZA40P2 to 40P7: self-cooled VZA41P5 to 4015: cooling fan