B.2 Parameter Table Parameter List B OYMC TOEP C71060622-01-OY V1000 User Manual 363 No. Name Description Analog Output Level Unit Control Mode Addr. Hex V/f O LV P M U1-18 OPE Fault Parameter Displays the parameter number for oPE or Err (operator error) where the error occurred. No output signal available – A A A 61 U1-19 MEMOBUS/Modbus Error Code Displays the contents of a MEMOBUS/ Modbus error. U1-19=00000000 1: CRC error 1: Data length error Not used (normally 0) 1: Parity error 1: Overrun error 1: Framing error 1: Timed out Not used (normally 0) No output signal available – A A A 66 U1-24 Input Pulse Monitor Displays the Pulse Train input RP frequency. 32000 7D U1-25 Software No.
(Flash) Flash ID No signal output available 4D U1-26 Software No. (ROM) ROM ID No signal output available 5B U2: Fault Trace Use U2 monitor parameters to view fault trace data. U2-01 Current Fault Display of the current fault. No signal output avail. – A A A 80 U2-02 Previous Fault Display of the previous fault. No signal output avail. – A A A 81 U2-03 Frequency Reference at Previous Fault Displays the frequency reference at the previous fault. No signal output avail. 0.01 Hz A A A 82 U2-04 Output Frequency at Previous Fault Displays the output frequency at the previous fault. No signal output avail. 0.01 Hz A A A 83