D.3 UL Standards ■ Drive Short-Circuit Rating This drive has undergone the UL short-circuit test, which certifies that during a short circuit in the power supply the current flow will not rise above 30,000 amps maximum at 240 V for 200 V class drives and 480 V for 400 V class drives. • The MCCB and breaker protection and fuse ratings shall be equal to or greater than the short-circuit tolerance of the power supply being used. • Suitable for use on a circuit capable of delivering not more than 30,000 RMS symmetrical amperes for 240 V in 200 V class drives (up to 480 V for 400 V class drives) motor overload protection.
◆ Drive Motor Overload Protection Set parameter E2-01 (motor rated current) to the appropriate value to enable motor overload protection. The internal motor overload protection is UL listed and in accordance with the NEC and CEC. ■ E2-01 Motor Rated Current Setting Range: Model Dependent Factory Default: Model Dependent Parameter E2-01 (motor rated current) protects the motor if parameter L1-01 is not set to 0 (default is 1, standard induction motor protection enabled). If Auto-Tuning has been performed successfully, the motor data that was entered in T1-04 is automatically written into parameter E2-01.
If Auto-Tuning has not been performed, manually enter the correct motor rated current in parameter E2-01. Standards Compliance ■ L1-01 Motor Overload Protection Selection The drive has an electronic overload protection function (OL1) based on time, output current and output frequency, which protects the motor from overheating. The electronic thermal overload function is UL-recognized, so it does not require an external thermal overload relay for single motor operation. D This parameter selects the motor overload curve used according to the type of motor applied.
OYMC TOEP C71060622-01-OY V1000 User Manual 413 Input / Output Terminal Signal Power Supply Specifications Main frequency reference (multi-function analog inputs) RP, +V, A1, A2, AC Use the internal power supply of the drive. Use class 2 for external power supply.