3.5 Protective Covers Figure 3.8 Electrical Installation Figure 3.8 Reattach the Protective Covers on an IP20/Open-Chassis Drive ◆ IP20/NEMA Type 1 ■ Removing the Protective Covers on an IP20/NEMA Type 1 design 1. Loosen the screw on the front cover to remove the front cover. 3 Figure 3.9 Figure 3.9 Remove the Front Cover on an IP20/NEMA Type 1 Drive 2. Loosen the screw on the terminal cover ( Figure 3.10 , B ) to remove the terminal cover and expose the conduit bracket ( Figure 3.10 , A ). Figure 3.10 A Figure 3.10 Remove the Terminal Cover on an IP20/NEMA Type 1 Drive 3. Loosen two screws attaching the conduit bracket ( Figure 3.11 , A ) to remove.
B OYMC TOEP C71060622-01-OY V1000 User Manual 57