Chapter 2 System Components Click the lock icon to take control of the camera. When you have control of the camera, the Modify button will appear beneath the camera settings. Click the Modify button to adjust camera settings. Note: The default IP address of the camera is: 192.168.0.10 . Be sure your PC is on the same subnet ( 192.168.0.100 , for example). Important: When modifying camera settings, you will need to enter a username and password for the camera if a password has been defined. 2-24 Vision HAWK Smart Camera Guide Modify camera settings in the Details area at the left of the Connect view. Create, Load, or Upload a job using the buttons in the center of the Connect view.