3. Configuration of the Application 3.1. Specification of the Sensor ●Specification Refer to the section 3-2-1 in the Vision System FH Series Hardware Setup Manual for 3D Robot Vision (Cat. No. Z436). ●Component Names and Functions 34 Name Description 1 2D lighting unit Lighting for 2D measurement is arranged to illuminate the light. 2 3D lighting unit Pattern lighting for 3D measurement is arranged to illuminate the light. 3 Imaging unit Captures images. 4 Connector for camera I/O cable Use this connector when connecting the camera with a power supply or an external device using a camera I/O cable. Dedicated camera I/O cable:
FH-VSDX-BX / FH-VSDX-LBX) 5 Connector for camera cable (Ethernet cable) Use this connector when connecting the camera with a FH sensor controller using an camera cable (Ethernet cable). Dedicated camera cable (Ethernet cable): FHV-VNBX / FHV-VNLBX) 6 Operation indicator PWR (Green) Lights while power is supplied. LINK (Green) Lights when connected with Ethernet equipment. ACT (Yellow) Blinks while communicating with an Ethernet device. WARM UP (Yellow) Lights from startup to completion of warming up. Turns off after warming up. ERR (Red) Lights when an error occurs.
For the error (system error), refer to the Camera Image Input AOS in the Vision System FH series Processing Item Function Reference Manual for 3D Robot Vision (Cat. No. Z445).