en Before using for the first time Rotary switch Cleaning the appliance and parts The rotary switch is used to start and stop processing and select the speed. 1. Clean all parts that come into con- tact with food before using for the first time. → "Cleaning and servicing", Page 27 2. Put the cleaned and dried parts out ready for use. Symbol Function Stop processing. Process ingredients at low speed. Process ingredients at maximum speed. Process ingredients briefly at max- imum speed. Basic operation Basic operation Safety systems Basic operation You can find an overview of your ap- pliance's safety systems here. Cable length Adjust the length of the power cable to your needs.
Start lock-out Start lock-out prevents your appli- ance from being switched on acci- dentally. You can switch on and operate the appliance once the blender jug has been correctly positioned. Adjusting cable length via cable storage compartment 1. Pull the power cable out to the re- quired length. 2. To shorten the cable, push it into the cable storage compartment. Overload protection The overload protection system pre- vents the motor and other compon- ents from being damaged through being overloaded. Recommended speeds You can find out here which speeds you can use to achieve optimal res- ults. Setting Use Briefly blending food with in- stantaneous switching at max- imum speed.
Blending, purйeing, emulsifying, frothing and cutting up food. Blending food that should not be cut up too small. Before using for the first time Before using for the first time Before using for the first time Configure the basic settings. Clean the appliance and accessories. Tip: Please use our recipe sugges- tions to gain experience with your new appliance. → "Overview of recipes", Page 28 26