Cleaning and servicing en Using the blender to process food Using instantaneous switch- ing 1. Set the rotary switch to and hold it there. → Fig. 7 a The ingredients are processed at maximum speed. 2. Release the rotary switch. a The rotary switch jumps to . a Processing stops. WARNING Risk of injury! Improper use may cause injuries. ▶ Only use the appliance once it is fully assembled. ▶ Never operate the appliance without fitting the lid. ▶ Never place fingers in the attached blender jug. Adding more ingredients 1. Prepare the food. For example, cut up large items of food. 2. Place the blender jug onto the base unit and rotate in a clockwise direction until it locks into place. → Fig. 3 3.
Add the food to the blender jug. → Fig. 4 Observe the minimum and max- imum processing quantities. → "Overview of recipes", Page 28 4. Insert the measuring jug in the lid and place the lid on the blender jug. → Fig. 5 The lid must be completely closed. 6. Insert the mains plug. 7. Set the rotary switch to the recom- mended speed. → Fig. 6 8. Process the ingredients until you achieve the required result. 9. To end the operation, set the rotary switch to . 1. During processing, remove the measuring jug and add the ingredi- ents through the opening in the lid. → Fig. 8 2. To add larger quantities, set the rotary switch to . 3. Wait until the appliance stops. 4. Remove the lid. → Fig. 9 5.
Add the ingredients. → Fig. 9 6. Place the lid on the blender jug again and continue to process the ingredients. Emptying the blender jug Requirement: The appliance has stopped. 1. Turn the blender jug anti-clockwise and remove it from the base unit. → Fig. 10 2. To pour out all of the processed food, remove the lid. → Fig. 11 Cleaning and servicing Cleaning and servicing Cleaning and servicing To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. 27