(thin ice alert) in addition to the display tem- perature. This symbol is displayed until the ambi- ent temperature rises above +6 ℃ → . ● In ambient temperatures above +4 ° C, roads may freeze even if the display does not dis- play the snowflake symbol that indicates a thin ice warning. When the vehicle is at rest or travelling at a low- er speed, the temperature displayed may be slightly higher than the actual ambient tempera- ture due to the thermal radiation effect of the engine. ● Do not rely only on the ambient temperature display screen to determine whether the road is icy! Temperature measurement ranges from -45 ℃ to +76 ℃ .
We have different models of instrument cluster, so the type and display items of in- strument cluster may be different. If the instru- ment cluster has no alarm or message text dis- play function, only the alarm/indicator lamp is used to indicate vehicle failure. Gear-change indicator To reduce fuel consumption, the display may suggest a fuel-saving gear while the vehicle is in motion → page 91. If the system detects several faults, each fault alert symbol is displayed for a few sec- onds in turn. The fault symbol is displayed until the fault is removed. Mileage displays Total odometer record the total miles travelled by the vehicle.
One-way odometer ( trip ) indicates the distance travelled since the last one-way mileage recorder reset. If the display displays fault alarm informa- tion when the ignition switch is on, some settings cannot be performed according to the preceding methods, or the display may display error information. In this case, you should drive to the qualified workshop as soon as possible to troubleshoot the problem. – Models equipped with analogue instrument cluster: One-way odometer can be reset by pressing 0.0 SET on the instrument cluster → page 14.
Automatic engine start-stop system status display The instrument cluster displays the current sta- tus information of the automatic engine start- stop system → page 101. Service menu Only applicable to models equipped with digital instrument cluster (basic) Engine code Depending on the vehicle type, some types of in- strument cluster can display the engine code. Please refer to at the start of the chapter on page 13. Models equipped with digital instrument cluster (basic) :
– In the instrument cluster menu, open the sub- menu Mileage/Time, select menu item Reset “from the start ” or Reset “the accumulation” ; Depending on the vehicle, the information can be set in the service menu through the multifunc- tion steering wheel. Bring up the service menu To bring up the Service menu, in the instrument cluster menu, open the submenu Mileage/Time, select menu item Reset “from the start ” Or Re- set “the accumulation” , then press and hold the button or on the multifunction steering wheel for 5 seconds, you can use the button on the multifunction steering wheel to navigate the menu in the normal way.
– Press and hold the button or on the mul- tifunction steering wheel about 5 seconds to bring up the service menu → page 16; – Select the Engine Code menu item. Streets and Bridges can freeze when ambient temperatures are around zero. WARNING ● “Snowflake” symbol indicates the danger of thin ice. Maintenance Select the Maintenance menu and display the main- tenance information on the instrument cluster. Owner's manual 16