Reset the oil change maintenance data Select the Reset Oil Change Maintenance data menu and confirm by pressing the button on the multifunction steering wheel. Switch drive data storage Press the button in the multifunction steering wheel. Memory from the start If the interrupted driving time is more than two hours, the system automatically deletes the data in the memory. Reset vehicle condition check data Select the Reset Vehicle Condition Check data menu and confirm by pressing the button on the multi- function steering wheel. Engine code (MKB) Depending on the vehicle, select menu Engine code . Engine code can be displayed on the instru- ment cluster.
Memory since refuelling Display and store collected driving and fuel con- sumption data. The system automatically deletes the data in the memory when fuel is added. Set time Select the Time menu and set the correct time by pressing the button on the multifunction steering wheel. Memory accumulation The memory collects travel data for any number of one-way trips. Depending on the instrument cluster type, the driving time collected by the memory can be up to 19 hours 59 minutes or 99 hours 59 minutes, and the driving range can be up to 9,999.9km. If the driving time or mileage exceeds any of the three maximum values 1) , the system automatically deletes the driving data from the memory.
Copyright information Depending on the vehicle type equipment, select the menu Copyright information , the copyright infor- mation can be displayed on the instrument clus- ter. Manually clear the drive data memory – Select the storage you want to delete. – Press and hold the button in the multifunc- tion steering wheel for about 2 seconds. Only applicable to models equipped with analogue instrument cluster Driving data (Multifunction display) Current fuel consumption Speed higher than 5 km/h, display the fuel con- sumption of 100Km (L/100Km) ; Speed below 3Km/h , display fuel consumption per hour (L/h) . Please refer to at the start of the chapter on page 13.
Driving data (multifunction display) display a va- riety of vehicle driving data and fuel consump- tion data. Average consumption The average fuel consumption is displayed on the screen after the starting driving of about 300m. Depending on the vehicle, it may show different driving data. The driving data shown depends on the current driving behavior, vehicle condition (e.g. particle catcher regeneration), and driving condition (e.g. city or highway driving). The driv- ing data is determined by the average of differ- ent lengths of road, which means that the cur- rent displayed value may differ from the actual average.
Driving range Approximate mileage of remaining fuel at current driving conditions. Travel time The elapsed time after turning on the ignition is shown in hours (h) and minutes (min). Toggle display item Press the button or → page 24 in the mul- tifunction steering wheel. Driving distance Displays the distance travelled (km) after turning on the ignition switch. 182.5C1.TRO.74 1) Depending on the instrument cluster model Driver information 17