en Explanation of symbols on the appliance and accessories In general, the turbo speed is recommended for processing food. For liquids, hot foodstuffs and for mixing together solids and liquids (e.g. muesli into yoghurt), it is advisable to use the speed control. The current speed is shown in the speed display when the On/Off button is activated. The more segments that light up, the higher the set speed. • Hold the blender and beaker fi rmly. • Switch on the blender by pressing the required On/Off button. Caution: Rotating tools. Do not insert fi ngers into the fi lling opening. Operation Clean the appliance and accessories thoroughly before using for the fi rst time, see »Cleaning and care«.
Blender Risk of injury due to sharp blade/ rotating drive Never touch the blade on the mixer foot. Do not clean the mixer foot blade using bare hands. Always use a brush. Important: Only fi t and remove the mixer foot when the appliance has come to a complete stop. The blender remains switched on for as long as the On/Off button is pressed. To prevent the mixing products from spraying out, do not press the On/Off button until the mixer foot is immersed in the food to be mixed. Always switch off the blender before extracting it from the mixed food. • When you have fi nished processing the food, release the On/Off button. • Unplug the mains plug.
• Press the release buttons and remove the mixer foot from the basic unit. For mixing mayonnaise, sauces, mixed drinks, baby food, cooked fruit and vegetables, and for processing ice. For pureeing soups. The blender is not suitable for preparing mashed potato. Preparation Tip for crushing ice: Place 2-3 ice cubes in the mixing beaker or similar plastic beaker. Hold the blender in the beaker, switch on, and press down onto the ice cubes. Lift and lower the appliance repeatedly onto the ice. Fig. B • Clean all parts before use. • Fully unwind the mains cable. • Insert the mixer foot into the basic unit and click into place. • Plug in the mains plug.
• Place the food in the mixing beaker or similar high-sided beaker. Multi-function accessory with tools Risk of injury due to sharp blade/ rotating drive Never insert fi ngers into the bowl during operation. Always use the pusher (13) to push ingredients into the beaker. The drive continues to run for a short time after the blender is switched off. Do not change the tool until the drive has come to a complete stop. When working with the multi-function accessory, the appliance can only be switched on if the drive unit is screwed tightly in place. The blender works better if the food to be processed contains some liquid. • Set the required speed using the speed regulator.
- Turning to the right reduces the rotary speed. - Turning to the left increases the rotary speed. Robert Bosch Hausgerдte GmbH 11