3. Start weighing. Weighing will start when the following two conditions are met. The net weight value of the load cell input unit is around 0 (i.e. 0.1 or below). The “ Start_WeightCtrl ” project variable is turned ON. Assign the “Start_WeightCtrl” variable to an input signal of the load cell input unit where necessary. 4. To monitor the weighing result, press the Operation Mode button to move to the monitoring page. 17 Fixed Weight Settings Specifies Fixed Weight Set Value of WC FixedWeightCtrl. _ WC FixedWeightCtrl _ Input variable: FixedWeightSetVal Name Description Save Writes the value specified as above in the destination variable. Load Reverts back to the value before change.
Individual Moves to the weighing monitoring page. Return Moves to the main menu page.