5. Monitor the measured value or weighing system status on the weighing machine monitoring page. 18 Name Description Near Zero Indicates that the net weight is around 0 (i.e. 0.1 or below) as follows: Lit: The net weight is 0.1 or below. Not lit：The net weight is above 0.1. Stable Indicates the stable status of the load cell input unit as follows: Lit: Detected the status where the gross weight value / force measurement value is stable. Not lit：Not detected the status where the gross weight value / force measurement value is stable. Center Value Indicates Center Value Judgment Result of WC WeightIndication as follows: _ Lit:
The rounding error is one fourth of the display value resolution or less. Not lit: The rounding error is greater than one fourth of the display value resolution. Under Range Indicates the result of detecting Under Range of the load cell input unit as follows: Lit: The Under Range is detected. Not lit: The Under Range is not detected. Over Range Indicates the result of detecting Over Range of the load cell input unit as follows: Lit: The Over Range is detected. Not lit: The Over Range is not detected. Under Minimum Value Indicates Minimum Display Under Judgment Result of WC WeightIndication as follows: _ Lit: The display value is below Minimum Display. Not lit:
The display value is above Minimum Display. Over Maximum Weight Indicates Maximum Capacity Over Judgment Result of WC WeightIndication as follows: _ Lit: The display value exceeded the maximum capacity. Not lit: The display value is equal to or below the maximum capacity. Error Indicates defect state of the load cell input unit as follows: Lit: A defect exists in the load cell input unit. Not lit: No defect exists in the load cell input unit. Status Indicates either one of the following Statuses of WC FixedWeightCtrl. _ --- (before operation), Large Feed, Medium Feed, Small Feed, Waiting for Judgment Result Indicates either one of the following Judgment Results of WC FixedWeightCtrl.
_ Over, Normal, Short Net Weight (Current) Indicates the net weight value of the load cell input unit. Net Weight (Target) Indicates the display value output by WC WeightIndication. Total Weight _ Indicates the gross weight value of the load cell input unit.