EPSON — Replacing a Maintenance Box

User's Guide Replacing Ink Cartridges and Other Consumables ❏ Keep the maintenance box out of direct sunlight. ❏ Do not replace the maintenance box during printing; otherwise, ink may leak. ❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box will have solidified and no more ink can be absorbed. Replacing a Maintenance Box In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the maintenance box has reached its limit.

Whether and how often this is required will vary according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs. Replace the maintenance box when you are promoted to do so. The Epson Status Monitor, your LCD, or lights on the control panel will advise you when this part needs replacing. The need for replacement of the box does not mean that your printer has ceased to operate in accordance with its specifications. The Epson warranty does not cover the cost of this replacement. It is a user-serviceable part. 1. Remove the new maintenance box from its package. c Important:

❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and printing. ❏ Do not remove the film on the top of the box; otherwise ink may leak. Note: A transparent bag for the used maintenance box is provided with the new maintenance box. 2. Open rear cover 1. 3. Remove the used maintenance box. 61