User's Guide Solving Problems 2. Remove the jammed paper. 3. Close the rear cover. Paper Does Not Feed Correctly Check the following if the paper jams, paper feeds at a slant, several sheets of paper feed at a time, no paper feeds, or paper is ejected. ❏ Place the printer on a flat surface and operate in the recommended environmental conditions. ❏ Use paper supported by this printer. ❏ Follow the paper handling precautions. ❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper. ❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load above the line just under the d symbol inside the edge guide.
❏ Insert the paper cassette all the way. ❏ When paper does not feed after replacing the maintenance rollers, the rollers may not have been replaced correctly. Check if they have been replaced correctly. ❏ If you have added optional paper cassette units, you need to make settings in the printer driver. ❏ When a no-paper error occurs although paper is loaded in the rear paper feed, load paper again in the center of the rear paper feed. ❏ When multiple sheets of paper feed at once during manual 2-sided printing, remove any paper which is loaded in the paper source before you reload the paper. ❏ Load and eject paper without printing to clean the paper path.
❏ Close the front cover if you opened it during printing. Keeping the –front cover open during printing pauses the print job. ❏ Do not open the rear cover while printing. This causes a paper jam. ❏ The maintenance rollers may be at the end of their service life. Select Menu > Maintenance > Maintenance Roller Information > Maintenance Roller Status , and then replace the maintenance rollers as necessary. 95