EPSON — Checking Messages on the LCD Screen

User's Guide Solving Problems Solving Problems Checking the Printer Status You can check error messages and the approximate ink levels on the LCD screen or the computer. Checking Messages on the LCD Screen If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to solve the problem. 151 Error Messages Solutions Printer error. Turn the power of fand on again. For details, see your documentation. Remove any paper or protective material in the printer and the paper cassette. If the error message is still displayed after turning the power off and on again, contact Epson support. Printer error. For details, see your documentation.

The printer may be damaged. Contact Epson or an authorised Epson service provider to request repairs. However, non-printing features such as scanning are available. Too many paper cassette units are installed. Turn the power off and uninstall the extra units. See your documentation for details. You can install up to 3 optional paper cassette units. For other optional paper cassette units, uninstall them by following the reverse steps to installation. Cannot print because XX is out of order. You can print from another paper source. Turn the power of fand on again, and then reinsert the paper cassette.

If the error message is still displayed, contact Epson or an authorised Epson service provider to request repairs. Maintenance rollers on XX are nearing the end of their service life. The maintenance rollers need to be replaced periodically. Paper is not fed correctly from the paper cassette when it is time for replacement. Prepare new maintenance rollers. Maintenance rollers on XX are at the end of their service life. Replace the maintenance rollers. After replacing the rollers, select Setup > Maintenance > Maintenance Roller Information > Reset Maintenance Roller Counter, and then select the paper cassette for which you replaced the maintenance rollers.

You need to replace the following ink cartridge(s). To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates it is time to replace the cartridge. Replace the cartridge when a message prompts you to do so. No dial tone detected. This problem might be resolved by selecting Setup > System Administration > Fax Settings > Basic Settings > Line Type, and then selecting PBX. If your phone system requires an external access code to get an outside line, set the access code after selecting PBX. Use # (hash) instead of the actual access code when entering an outside fax number.

This makes connection more secure. If the error message is still displayed, set the Dial Tone Detection settings to disabled. However, disabling this feature may drop the frist digit of a fax number and send the fax to the wrong number.