User's Guide Solving Problems Related Information & “Connecting to a Phone Line” on page 90 & “Scan Mode” on page 24 & “Fax Settings” on page 34 & “Available Paper and Capacities” on page 38 & “Using an Email Server” on page 205 Checking the Printer Status - Windows 1. Access the printer driver window. 156 Code Problem Solution 413 A communication error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > Email Server > Server Settings to check the email server settings. You can check the cause of the error by running connection check. ❏ The authentication method of the settings and the email server may not match.
When you select Of fas the authentication method, make sure the authentication method of the email server is set to None. ❏ Check the network connection. See the Network Guide for more details. 421 A DNS error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > DNS Server, and then check the DNS settings. ❏ Check the DNS settings for the server, the computer, or the access point. 422 An authentication error has occurred. Select Setup > System Administration > Fax Settings > Output Settings > Fax Output > Other Settings, and then check the settings of the folder selected in Where to Forward. 423 A communication error has occurred.
It is also possible that a flie with the same name is open or the file is a read-only file. ❏ Check the network connection. See the Network Guide for more details. ❏ Select Setup > System Administration > Fax Settings > Output Settings > Fax Output > Other Settings, and then check the settings of the folder selected in Where to Forward. ❏ Close the flie with the same name or disable the read-only protection. 425 There is not enough storage space available in the forwarding destination folder. Increase the storage space in the forwarding destination folder. 428 The destination was wrong or the destination does not exist.
Select Setup > System Administration > Fax Settings > Output Settings > Fax Output > Other Settings, and then check the settings of the folder selected in Where to Forward.