EPSON — Error Code on the Status Menu

User's Guide Solving Problems 155 Code Problem Solution 325 There is not enough storage space available in the specifei d folder. ❏ Increase the storage space in the specifei d folder. ❏ Reduce the number of documents. ❏ Lower the scanning resolution or increase the compression ratio to reduce the size of the scanned image. 327 The memory is full. Wait until other ongoing jobs are fni ished. 328 The destination was wrong or the destination does not exist. Check the Location settings. 331 A communication error occurred while acquiring the destination list. Check the network connection. See the Network Guide for more details.

332 There is not enough storage space available to save the scanned image in the destination storage. Reduce the number of documents. 333 The destination could not be found because the destination information was uploaded to the server before sending the scanned image. Select the destination again. 334 An error occurred while sending the scanned image. - 341 A communication error has occurred. ❏ Check the connections for the printer and the computer. If you are connecting over a network, see the Network Guide. ❏ Make sure that Document Capture Pro is installed on the computer. 401 There is not enough storage space available to save the data in the memory device.

Increase the storage space in the memory device. 402 The memory device is write-protected. Disable write protection on the memory device. 404 The memory device has been removed. Reinsert the memory device. 405 An error occurred while saving the data to the memory device. ❏ Reinsert the memory device. ❏ Use a difef rent memory device on which you have created a folder using the Create Folder to Save function. 411 A DNS error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > DNS Server, and then check the DNS settings. ❏ Check the DNS settings for the server, the computer, or the access point. 412 An authentication error has occurred.

Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > Email Server > Server Settings, and then check the server settings.