EPSON — Error Code on the Status Menu

User's Guide Solving Problems 154 Code Problem Solution 305 An error occurred while saving the data to the memory device. If the external device is accessed from a computer, wait for a while and then try again. 306 The memory is full. Wait until other ongoing jobs are fni ished. 311 A DNS error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > DNS Server, and then check the DNS settings. ❏ Check the DNS settings for the server, the computer, or the access point. 312 An authentication error has occurred.

Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > Email Server > Server Settings, and then check the server settings. 313 A communication error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > Email Server > Server Settings to check the email server settings. You can check the cause of the error by running connection check. ❏ The authentication method of the settings and the email server may not match. When you select Of fas the authentication method, make sure the authentication method of the email server is set to None. ❏ Check the network connection. See the Network Guide for more details.

314 The data size exceeds the maximum size for attached files. ❏ Increase the Attached File Max Size setting in the scan settings. ❏ Lower the scanning resolution or increase the compression ratio to reduce the size of the scanned image. 315 The memory is full. Retry after other ongoing jobs are fni ished. 321 A DNS error has occurred. ❏ Select Setup > System Administration > Wi-Fi/ Network Settings > Advanced Setup > DNS Server, and then check the DNS settings. ❏ Check the DNS settings for the server, the computer, or the access point. 322 An authentication error has occurred. Check the Location settings. 323 A communication error has occurred. ❏ Check the Location settings.

❏ Check the network connection. See the Network Guide for more details. 324 A file with the same name already exists in the specifei d folder. ❏ Delete the flie with the same name. ❏ Change the flie name prefxi in File Settings.