Chapter 2: Installation Installing a Passive CPU Heatsink 1. Apply the proper amount of thermal grease to the heatsink if needed. 2. Place the heatsink on top of the CPU so that the two mounting holes on the heatsink are aligned with those on the retention mechanism. 3. Using a screw driver, install four screws on the sides of the heatsink through the mounting holes on the motherboard in the sequence as shown below, and turn the screws clockwise to lock them. Screw#3 Direction of Airflow Screw#2 Screw#1 Screw#4 Motherboard OPEN 1st Note: For optimized airflow, please follow your chassis airflow direction to properly install the CPU heatsink.
Graphic drawings included in this manual are for reference only. They might look different from the compo nents installed in your system. 2-23