Supermicro X10DRT-B+ — Supermicro X10DRT-B+ Motherboard User's Manual PDF (Rev 1.0c)

X10DRT-B+ Motherboard User’s Manual Removing the Passive Heatsink Warning: We do not recommend that the CPU or the heatsink be removed. However, if you do need to remove the heatsink, please follow the instructions below to uninstall the heatsink to avoid damaging the CPU or other components. 1. Unplug the power cord from the power supply. 2. Use a screw driver to loosen the screw from the motherboard by turning it counter-clock-wise. Repeat the same step to remove all screws from the motherboard in the sequence as shown below. 3. Hold the heatsink as shown in the picture below, and gently wriggle the heat­ sink to loosen it.

(Do not use excessive force when wriggling the heatsink.) Loosen screws in sequence as shown. Screw#4 Airflow Direction Screw#1 Screw#2 Motherboard Screw#3 4. Once the heatsink is loosened, remove it from the motherboard. Note: For optimized airflow, please follow your chassis airflow direction to properly install the CPU heatsink. Graphic drawings included in this manual are for reference only. They might look different from the compo­ nents installed in your system. 2-24