Chapter 3: Troubleshooting 6. To find out if a component is good, swap this component with a new one to see if the system will work properly. If so, then the old component is bad. You can also install the component in question in another system. If the new system works, the component is good and the old system has problems. 3-2 Technical Support Procedures Before contacting Technical Support, please take the following steps. Also, please note that as a motherboard manufacturer, Supermicro also sells motherboards through its channels, so it is best to first check with your distributor or reseller for troubleshooting services.
They should know of any possible problem(s) with the specific system configuration that was sold to you. 1. Please go through the ‘Troubleshooting Procedures’ and 'Frequently Asked Question' (FAQ) sections in this chapter or see the FAQs on our website ( http://www.supermicro.com/ ) before contacting Technical Support. 2. BIOS upgrades can be downloaded from our website (http://www.supermicro. com ). 3. If you still cannot resolve the problem, include the following information when contacting Supermicro for technical support: Motherboard model and PCB revision number BIOS release date/version (This can be seen on the initial display when your system first boots up.) System configuration 4.
An example of a Technical Support form is on our website at ( http://www. supermicro.com/RmaForm/ ). Distributors: For immediate assistance, please have your account number ready when placing a call to our technical support department. We can be reached by e-mail at support@supermicro.com. 3-5