Chapter 4: AMI BIOS Select 0 ~ 4 to allow the AMI BIOS to use PIO mode 0 ~ 4. It has a data transfer rate of 3.3 MB/s ~ 16.6 MB/s. See the table below. PIO Mode Select Options DMA Mode Select Auto to allow the BIOS to automatically detect IDE DMA mode when the IDE disk drive support cannot be determined. The options are Auto , SWDMAn, MWDMAn, and UDMAn. See the table below for DMA Mode Select Options. DMA Mode Select Options S.M.A.R.T. For Hard disk drives Self-Monitoring Analysis and Reporting Technology (SMART) can help predict impending drive failures. Select Auto to allow the AMI BIOS to automatically de- tect hard disk drive support.
Select Disabled to prevent the AMI BIOS from using the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to support hard drive disk. The options are Disabled, Enabled, and Auto . 32Bit Data Transfer Select Enable to enable 32-bit IDE data transferring support. The options are Enabled and Disabled. 4-13 Option Selected PIO Mode Max. Transfer Rate 0 PIO Mode 0 3.3 MB/s 1 PIO Mode 1 5.2 MB/s 2 PIO Mode 2 8.3 MB/s 3 PIO Mode 3 11.1 MB/s 4 PIO Mode 4 16.6 MB/s Option Selected DMA Mode Max.
Transfer Rate SWDMA 0 Single-Word DMA 0 2.1 MB/s SWDMA1 Single-Word DMA 1 4.2 MB/s SWDMA 2 Single-Word DMA 2 8.3MB/s MWDMA 0 Multi-Word DMA 0 4.2 MB/s MWDMA1 Multi-Word DMA 1 13.3 MB/s MWDMA 2 Multi-Word DMA 2 16.6 MB/s UDMA 0 Ultra DMA 0 16.6 MB/s UDMA 1 Ultra DMA 1 25 MB/s UDMA 2 Ultra DMA 2 33.3 MB/s UDMA 3 Ultra DMA 3 44.4 MB/s UDMA 4 Ultra DMA 4 66.6 MB/s UDMA5 Ultra DMA 5 100 MB/s UDMA 6 Ultra DMA 6 133 MB/s