Supermicro X8DTG-QF+ — X8DTG-QF+ 1.0.indb

X8DTG-QF+ User’s Manual PCI/PnP Confi guration Clear NVRAM Select Yes to clear the NVRAM (Non-volatile random-access memory) during sys- tem boot. The options are No and Yes. Plug & Play OS Selecting Yes allows the OS to confi gure Plug & Play devices. (This is not required for system boot if your system has an OS that supports Plug & Play.) Select No to allow the AMI BIOS to confi gure all devices in the system. PCI Latency Timer This feature sets the latency Timer of each PCI device installed on a PCI bus. Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64 , 96, 128, 160, 192, 224 and 248.

PCI IDE BusMaster When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives. The options are Disabled and Enabled. SR-IOV Support Single Root I/O Virtualization is an industry-standard mechanism that enables a device to share its resources among several virtual machines. SR-IOV is capable of partitioning a PCI function into several virtual interfaces for sharing the resources of a PCI Express device under a virtual environment. The options are Disabled and Enabled. PCI-E Slot 1~Slot 4 x16, PCI-E Slot 5~Slot 6 x8, PCI-E Slot 7~Slot 8 x4 Use this setting to enable or disable any of the PCI slots indicated above. The op- tions are Disabled and Enabled.

Onboard LAN 1 Option ROM 1 Select Use this item to select the type of onboard option ROM to load. The options are PXE and iSCSI. Load Onboard LAN 1 Option ROM/Load Onboard LAN 2 Option ROM Select Enabled to enable onboard LAN1/LAN2 Option ROMs support which will allow you to boot your systems using a network interface. The default option for LAN1 is Enabled , and for LAN2 is Disabled . 4-14