Chapter 4: AMI BIOS Boot Graphics Adapter Priority This feature allows the user to specify which graphics controller to be used as the primary boot graphics controller. The options are Onboard VGA , PCI Slot 6 and Offboard VGA . Super IO Device Confi guration Serial Port1 Address, Serial Port2 Address This option specifi es the base I/O port address and the Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address.
The options for Serial Port1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3 and 2F8/IRQ3. The options for Serial Port2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4, 3F8/IRQ4, and 2E8/IRQ3. Remote Access Confi guration Remote Access Select Enabled to enable Remote Access support. The options are Disabled and Enabled . If Remote Access is set to Enabled, the following items will display: Serial Port Number This feature allows the user decide which serial port to be used for Console Redirection. The options are COM 1 and COM2 . Base Address, IRQ This item displays the base address and IRQ of the serial port used for Console Redirection.
This setting is confi gured via the item-Serial Port 1 Address/IRQ or Serial Port 2 Address/IRQ in the Super I/O submenu. Serial Port Mode This feature allows the user to set the serial port mode for Console Redirection. The options are 115200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1. Flow Control This feature allows the user to set the fl ow control for Console Redirection. The options are None , Hardware, and Software. 4-15