Supermicro X8DTG-QF+ — X8DTG-QF+ 1.0.indb

X8DTG-QF+ User’s Manual Redirection After BIOS POST Select Disabled to turn off Console Redirection after Power-On Self-Test (POST). Select Always to keep Console Redirection active all the time after POST. (Note: This setting may not be supported by some operating systems.) Select Boot Loader to keep Console Redirection active during POST and Boot Loader. The options are Disabled, Boot Loader, and Always . Terminal Type This feature allows the user to select the target terminal type for Console Redi- rection. The options are ANSI, VT100 , and VT-UTF8. VT-UTF8 Combo Key Support Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals.

The options are Enabled and Disabled. Sredir Memory Display Delay This feature defi nes the length of time in seconds to display memory information. The options are No Delay, Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec. Hardware Health Confi guration This feature allows the user to monitor system health and review the status of each item as displayed. CPU Overheat Alarm This option allows the user to select the CPU Overheat Alarm setting which de- termines when the CPU OH alarm will be activated to provide warning of possible CPU overheat. Warning! 1. Any temperature that exceeds the CPU threshold temperature pre- defi ned by the CPU manufacturer may result in CPU overheat or system instability.

When the CPU temperature reaches this predefi ned threshold, the CPU and system cooling fans will run at full speed. 2. To avoid possible system overheating, please be sure to provide ad- equate airfl ow to your system. The options are: The Early Alarm: Select this setting if you want the CPU overheat alarm (includ- ing the LED and the buzzer) to be triggered as soon as the CPU temperature reaches the CPU overheat threshold as predefi ned by the CPU manufacturer. 4-16