X8DTG-QF+ User’s Manual IP Address Source This feature allows the user to select the source of the IP address for the system. If Static is selected, the user will need to manually enter the IP address for the system. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Confi guration Protocol) server in the network that the system is attached to, and request the next available IP address. The options are DHCP and Static. If Static is selected, the following items will be available for confi guration. IP Address BIOS will automatically enter the IP address of the machine you are using; how- ever the IP address may be overwritten.
The IP address should be in decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-digit number separated by dots should not exceed 255. Subnet Mask This item displays the current subnet mask setting for your IPMI connection. The value of each three-digit number separated by dots should not exceed 255. Gateway Address BIOS will automatically enter the Gateway address of this machine; however it may be overwritten. Gateway addresses are 4-decimal numbers in dotted quad form (i.e., 192.168.10.253). The value of each 3-digit number separated by dots should not exceed 255.
Mac Address The BIOS will automatically enter the Mac address of this machine; however it may be overwritten. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60). Event Log Confi guration View Event Log Use this option to view the System Event Log. Mark all events as read Select OK to mark all events as read. The options are OK and Cancel. Clear event log Select OK to clear all messages in the event log. The options are OK and Can- cel. 4-22