Supermicro X8DTG-QF+ — X8DTG-QF+ 1.0.indb

Chapter 4: AMI BIOS PCIE Error Log Select Yes to log PCI-E Errors. The options are Yes and No . Memory ECC Error Log Select Yes to enable ECC memory error logging . The options are Yes and No. 4-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set fi rst. Supervisor Password This item indicates if a supervisor password has been entered for the system. "Not Installed" means a supervisor password has not been used. User Password This item indicates if a user password has been entered for the system. "Not In- stalled" means that a user password has not been used.

Change Supervisor Password Select this feature and press to access the submenu, and then enter a new Supervisor Password. User Access Level (Available when Supervisor Password is set as above) Use this feature to set the user's access level. Select Full Access to grant the user full read and write access to the BIOS Setup Utility. Select View Only to allow the user to view the Setup Utility displays without making any changes. Select Limited 4-23