User's Guide Solving Problems Solving Problems Checking the Printer Status Checking Messages on the LCD Screen If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to solve the problem. 133 Error Messages Solutions Printer error. Turn the power of fand on again. For details, see your documentation. If the error message is still displayed after turning the power of fand on again, contact Epson support. Operation canceled. An error occurred while saving. The external storage device, such as a memory card, may be damaged. Check if the device is available. Ink is low.
You can continue printing until you are prompted to replace the ink cartridges. However, note that the printer cannot print if any of the ink cartridges is expended. Prepare new cartridges as soon as possible. You need to replace the following ink cartridge(s). To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates it is time to replace the cartridge. Replace the cartridge when you are prompted to do so. Ink cartridge(s) are low. Print job may not print completely. Press Proceed on the error message screen to select one of the following options.
Replace before printing Continue printing Cancel printing If any of the ink cartridges is expended during printing, the paper is ejected in the middle of printing. When printing on paper larger than A4 size, we recommend selecting Replace before printing and replacing the ink cartridge with a new one. We strongly recommend replacing with a large size Epson ink cartridge. Paper Configuration is disabled. Some features may not be available. For details, see your documentation. If Paper Configuration is disabled, you cannot use AirPrint. In addition, messages notifying you that the paper size and type do not match are not displayed.
Keep this setting enabled unless you always use the same size and type of paper and do not need to change the paper settings. The printer's ink pad is nearing the end of its service life. Please contact Epson Support. Contact Epson or an authorised Epson service provider to replace the ink pad*. It is not a user-serviceable part. The message will be displayed until the ink pad is replaced. x Press the button to resume printing. The printer's ink pad is at the end of its service life. Please contact Epson Support. Contact Epson or an authorised Epson service provider to replace the ink pad*. It is not a user-serviceable part. Communication error. Check if a computer is connected.
Connect the computer and the printer correctly. If you are connecting over a network, see the Network Guide. If the error message is still displayed, make sure that EPSON Scan and Epson Event Manager are installed on the computer.