ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

2.1.6 WARNING SIGN ON THE MACHINE FOR HAZARD WHEN SHIFTING GEARBOX HANDLES Meaning : Do not shift gearbox handles when spindle running. Always stop spindle before speed change 2.2 SAFETY INSTRUCTIONS FOR THE END USER 2.2.1 MACHINE SAFETY DEVICES This machine is factory provided with the following safety devices: Share pin on the feed box output shaft For protection when dangerous overload occurs. SAFETY GUARDS: Rear safety guard . Protects against unintentional access into machine working area and against chips and coolant splash. Toolholder guard . Protects the operator against chips. Lead screw and shaft guard. (Available for CE version, only).

Protects against unintentional access to rotating lead screw and shaft. Chuck guard (integrated with micro switch). Protects against dangerous access into dangerous area of rotation of the universal chuck, faceplate and drive plate. When opened the micro switch automatically stops the machine. SAFETY MICRO SWITCHES: Micro switch on qudrant box door. Protects against rotating quadrant parts when the door is to be opened. Micro switch on control lever for spindle forward and reverse rotation When the main power supply failed this micro switch protects against dangerous machine restart when the supply is restored. EMERGENCU STOP PUSHBUTTONS (red mushroom) :

Emergency stop pushbutton on the machine control panel. Emergency stop pushbutton on the machine fixed rear guard (CE version DBC 1000). Must be used for emergency stop, ONLY. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 12/67