ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

EMERGENCY STOP PEDAL (option) СU325; С8С СЕ Located below along the machine length for an immediate actuating by foot to stop the machine in emergency. Must be used for emergency stop, ONLY. 2.2.2 GENERAL SAFETY PRECAUTIONS FOR MACHINE OPERATION AND MAINTENANCE Excursive periodical verification for mounting and functional condition of machine safety devices. Operate the machine if the safety devices function is correct , only. Warning: Any remove, design alteration or isolated the function of whatever safety device is hazardous for the operator, maintenance personnel and environment.

Before operation or maintenance works with the machine it is essential for the operator and maintenance personnel to read and understand this manual. All precautions and instructions in this manual and signs and labels on the machine shall be strictly observed. Keep this manual in clean and safety place so the be available to operator and maintenance personnel any time. 2.2.3 INSTRUCTIONS FOR OPERATOR AND MAINTENANCE PERSONNEL The operator of this machine to be trained for operation with lathe machine, duly authorized and instructed for safety work in compliance with local safety norms. Before operation with this machine the operator must read and understand the present safety instructions.

The mechanic and electrician for this machine maintenance to be trained for maintenance of machine tools duly authorized and instructed for safety maintenance of this machine in compliance with local safety norms. Before operation with this machine the operator must read this manual and understand the present safety instructions. The machine to be used in compliance with its application only and having all safety instructions and recommendation in this manual observed. Before machine start verify the correct condition of all safety devices and their trouble free function. Excursive periodical verification for the functional condition of machine safety devices.

When the machine is shut down for a short or long time take all safety measures so that it should not be a source for hazardous circumstances as unintentional powered or start. Tools, accessories, workpieces etc., to be kept outside the machine on their defined locations. Do not place them on the machine, inside the bed or other machine locations so that be a reason for hazard. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 13/67